HP Color LaserJet Enterprise Flow MFP X57945 Color LaserJet Enterprise Flow MFP X57945DN Benutzerhandbuch Seite 169

5. Make sure the tray 1 guides are set to the correct paper size and that the paper tray is not overfilled
(paper is below the 3 triangles on the right guide).
6. Load the paper back into the tray and restart the print job.
7. If the same jam appears remove and clean the tray 1 pick, feed and separation rollers.
a. Locate and release the pickup roller assembly release tab.
Abbildung 9-13
158 Kapitel 9 Beheben von Problemen
Locate the pickup roller assembly tab
1