Wall Mounting; Technical Data - Kathrein BZD 30 Bedienungsanleitung

Optimising with the DVB-T receiver
Some receivers
allowing you to optimise the antenna positioning still further. In this case, please refer to the operating instructions for your
receiver.

Wall Mounting

The antenna is supplied with a wall bracket and the attach-
ment material you need to mount the antenna on the wall.
Experiment with the reception and look for the most suitable
wall position for reception before you drill the holes for the
wall bracket.
Cleaning
Clean the antenna only with a slightly moistened cloth. Do not use acidic or abrasive cleaners, because these could damage
the surface of the housing. Never immerse the device in any fl uid.

Technical data

Type
Part no.
Reception range
Figure of merit ¹
)
Max. output level ²
)
Dimensions
Packing unit/weight
Single pack dimensions
¹ Bandwidth 8 MHz, Tu = 290 K, connection cable a = 3,5 dB, receiver LF = 7 dB @ 560 MHz
)
² Measured at the amplifi er output in accordance with EN 60728-5 for 60 dB KMA (3 transmitters - 3
)
Electronic equipment is not household waste. In accordance with directive 2002/96/EC OF THE EUROPEAN PARLIA-
MENT AND THE COUNCIL of 27th January 2003 on used electrical and electronic equipment, it must be disposed of
properly.
At the end of its service life, take this unit for disposal at a designated public collection point.
Internet: www.kathrein.de
KATHREIN-Werke KG • Anton-Kathrein-Straße 1 - 3 • P.O. Box 10 04 44 • 83004 Rosenheim • GERMANY • phone +49 8031 184-0 • Fax +49 8031 184-306
feature on-screen
MHz
dB/K
dBμV
mm
Units/kg
mm
signal level
BZD 30
20710002
174-230/470-790
typ. -28,5
typ. 95
140 x 195
1 (10)/0,5
250 x 160 x 70
order)
rd
936.4610/-/VKDT/0513/GB - Technical data subject to change!
and quality displays,