Wall Mounting; Technical Data; Waste Disposal - Kathrein BZD 32 Anleitung

Optimising with a DVB-T/T2 Receiver
Some receivers offer the option of displaying the reception level and the signal quality on the screen, thus permitting further optimisa-
tion of the antenna positioning. For more information, refer to the operating manual of your receiver.

Wall Mounting

A wall bracket and the necessary mounting material for mounting the antenna
on the wall are included in the scope of delivery.
► Test the reception and look for the most suitable reception position on the
wall before drilling the holes for the wall bracket.
Cleaning
● Clean the antenna only with a slightly moistened cloth.
● Do not use aggressive or abrasive cleaners because these could damage the surface of the housing.
● Do not immerse the device in any fluid.

Technical Data

Type
Order number
Reception range
Figure of merit ¹
)
Max. output level ²
)
Dimensions
Packaging unit/weight
Single pack dimensions
¹) Bandwidth 8 MHz, Tu = 290 K, connection cable a = 3.5 dB, AF receiver = 7 dB @ 560 MHz
²) According to EN 60728-5 for 60 dB intermodulation ratio (2 transmitters – 3

Waste Disposal

Electronic equipment
Electronic equipment is not domestic waste – in accordance with directive 2002/96/EC OF THE EUROPEAN
PARLIAMENT AND THE COUNCIL dated 27th January 2003 concerning used electrical and electronic appliances, it
must be disposed of properly. At the end of its service life, take this unit for disposal at a designated public collec-
tion point.
www.kathrein.com | sat@kathrein.de
KATHREIN-Werke KG, Anton-Kathrein-Straße 1-3, 83022 Rosenheim, Germany, Phone +49 8031 184-0, Fax +49 8031 184-52360
MHz
dB/K
dBµV
mm
St./kg
mm
order) measured at antenna output
rd
3 / 3
BZD 32
20710013
174 – 230/470 – 790
typ. –28.4
typ. 95
140 x 195
1 (10)/0.5
250 x 160 x 70
936.5091/-/VMPT/0216/GB | Subject to change.