Klarfit Gym 3000 Bedienungsanleitung Seite 34

Step 3
Attach Vertical support (5) to Main
base tube (1) using reinforced plate
(48) and Hex bolts M10x50 (60 - 2
sets) washers and nuts.
Attach Upper support (4) to Vertical
support (5) using reinforced plate
(48) and Hex bolts M10x50 (60 - 2
sets) and insert chrome bars (22)
into holes of upper support (4) using
Hex bolts M10x25 (63 - 2 sets).
Attach seat support (6), reinforced
tube (8) to Vertical support (5)
using reinforced plate (48) and Hex
bolts M10x50 (60 - 2 sets), bolts
M10x45 (61 - 1 set) washers and
nuts.
Step 4
Attach the chest press (10) to upper
support (4) using Hex bolts M10x45
(60 - 2 sets), washers and nuts.
Attach the pulley shaft (30), prop
support (51) to vertical support
(5) using Hex bolts M10x50 (51 -
2sets), washers and nuts.
34