Cleaning And Maintenance; Troubleshooting - Velleman CAMSETW12 Bedienungsanleitung

• System Options – Auto Run
Launch the program automatically when the system starts: select
this option to enable the auto run and to resume the status before
shutdown.
Dialup automatically when the program starts: check this box to
enable the automatic dialup with internet connection needing a
manual dialup.
• System Options – On-Screen Display
Display Options OSD Device: displays the name of the device on the
captured images.
Display Options OSD Time: displays the date and time on the captured
images.
Font: set the font of the displayed content.
• System Options – Network
Network Mode: can be set in auto mode or direct mode. Generally the
auto mode will do. If the program cannot detect the network, select the
direct mode.
Network Speed: this setting determines the frame rate according to the
internet connection type.
• System Options – Other
Displays the hot keys.

8. Cleaning and Maintenance

The devices are maintenance-free and will not need to be disassembled. Wipe the devices regularly with a dry, lint-
free cloth. Do not use alcohol or solvents. Disconnect the devices from the mains prior to cleaning.

9. Troubleshooting

Problem
No image/sound
Distorted image/sound
Flickering/running image
Image is too light/dark
White screen
CAMSETW12
Possible Cause
• Camera or receiver is not powered.
• Power adapter incorrectly connected to the mains.
• Distance between camera and receiver is too important.
• Range of the system has been exceeded. Shorten the distance between
camera and receiver.
• Strong interference source from e.g. electric engine, walkie-talkie...
• Strong spotlight or neon light nearby.
• Surveillance monitor wrongly set up.
• Strong spotlight or neon light nearby.
• Supply voltage is too low.
- 8 - VELLEMAN