Introduction & Features; Safety Instructions - Velleman CAMSETW12 Bedienungsanleitung

CAMSETW12 – WEATHERPROOF WIRELESS COLOUR CAMERA KIT
1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer. Your CAMSETW12 comes with 1 x
2.4GHz wireless colour camera, 1 x 2.4GHz receiver, 1 x camera stand, 1 x 7.5VDC power adapter for camera, 1 x
7.5VDC power adapter for receiver, A/V cable and this manual.

2. Safety Instructions

Be very careful during the installation: touching live wires can cause life-threatening electroshocks.
Keep this device away from rain and moisture.
Unplug the mains lead before opening the housing.
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer
will not accept responsibility for any ensuing defects or problems.
• This unit should only be installed, disassembled, repaired and serviced by an authorized technician.
• Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.
• Make sure that all electric connections and connection cables between the devices of the camera system as well as
the devices to be connected meet the pertaining regulations and are in conformity with the operating instructions.
• Observe the safety notices and operating instructions of the connected appliances.
• Do not operate the devices unsupervised.
• Do not crimp the power cord and protect it against damage. Have an authorised dealer replace it if necessary.
• Disconnect the device from the mains to clean it or when it is not in use. Handle the power cord by the plug only.
Never handle the power adapter with wet hands.
• Disconnect from the mains during thunderstorms.
• Note that damage caused by user modifications to the device is not covered by the warranty.
• Keep the device away from children and unauthorised users.
3. Description
a. Camera
1. lens
2. aerial
3. power jack
4. channel DIP switches
5. microphone
6. DC power adapter
CAMSETW12
- 3 - VELLEMAN