Care And Cleaning; Installation - Lord R6 Bedienungsanleitung

Care and cleaning

• Before maintenance, switch off the appliance and disconnect
the mains plug from the mains; socket.
• Do not clean the appliance with metal objects.
• Do not use sharp objects to remove frost from the appliance.
Use a plastic scraper.
• Regularly examine the drain in the refrigerator for defrosted
water. If necessary, clean the drain.
If the drain is blocked, water will collect in the bottom oft he
appliance. (If there is a fresh-food storage compartment.)*

Installation

Important! For electrical connection carefully follow the
instructions given in specific paragraphs.
• Unpack the appliance and check if there are damages on it.
Do not connect the appliance if it is damaged. Report possible
damages immediately to the place you bought it. In that case
retain packing.
• It is advisable to wait at least four hours before connecting the
appliance to allow the oil to flow back in the compressor.
• Adequate air circulation should be around the appliance, lacking
this leads to overheating. To achieve sufficient ventilation follow
the instructions relevant to installation.
• Wherever possible the spacers of the product should be against
a wall to avoid touching or catching warm parts (compressor,
con-denser) to prevent possible burn.
• The appliance must not be located close to radiators or cookers.
• Make sure that the mains plug is accessible after the installation
oft he appliance.
* depending on model and equipment
34