Siko MA502 Zusatz Zur Originalmontageanleitung Seite 21

MA502-SW01
Programming mode
5 Programming mode
The display is delivered ex factory with default settings. Normally pro-
gramming is only necessary at initial installation. Parameters can be
modified and checked at any time. They are stored in a non-volatile
memory. For designation, function and selectable values refer to the table
in chapter 6.
To change and control parameters
For parameter modification enter into programming mode.
To enter into programming mode
Press key
med under P-KEY delay.
To leave programming mode
No key actuation for at least 30 s, or press key
meter list is reached.
To scroll parameter information
Use key
To change parameters
Use keys
To store/modified parameters
Press key
6 Parameter description
For a detailed parameter list containing all parameters that can be set and
the possibility to note down specific configurations refer to chapter 11.
The first selection is made in the menu items LANGUAGE (the term "SPRA-
CHE" will be displayed first in German):
1. Parameter LANGUAGE: = "ger" German (or "deu"), "eng" English.
MA502-SW01 · Date 13.03.2014 · Art. No. 81825 · Mod. status 422/13
for at least 5 s (pre-programmed) or for the period program-
.
and .
, then message "saving..." will be briefly displayed.
English
until the end of the para-
21