Switching On/Off; Using Horizontal And Vertical Laser Lines; Working With The Automatic Leveller - Parkside Performance Pkllp 360 B3 Bedienungs- Und Sicherheitshinweise

˜ Switching on/off
CAUTION! Laser beam ‒ Do not look into the beam
Turn your head away or close your eyes to prevent looking into
the laser beam. Risk of eye injury!
Switching on: Briefly press the on/off button
Switching off: Press and hold the on/off button
˜ Using horizontal and vertical laser lines
After switching on, the 360° laser line
line are activated.
[ ]
Activate the 360° laser line
Briefly press the on/off button
Activate the vertical laser line
Briefly press the on/off button
˜ Working with the automatic leveller
1. Push the levelling slide switch
2. Place the product on a horizontal, solid surface or fasten the product
to a tripod (see "Working with the tripod").
3. Switch on the product. The leveller light
Leveller light
Green
Red
NOTE: In the event of vibrations, the laser will level itself
automatically. Wait until the laser lines no longer move.
only:
1 ] [
.
[ ]
only:
[ ]
.
[ ]
to the left (open lock).
[ ]
Meaning
[ ]
Automatic levelling is possible. Levelling
is complete once the laser lines no longer
move.
Automatic levelling is not possible.
The laser lines flash.
.
[ ]
for 2 seconds.
[ ]
and the vertical laser
1 ] [
lights up.
[ ]
!
1 ] [ [ ]
GB/IE 25