Heatcom HC 30-15 Benutzerhandbuch Und Installationsanleitung Seite 6

PRECAUTIONS
• Do not install thermostat in direct sunlight
• Do not install on severely cold outer walls
• If the thermostat is not in the same room as the heating,
only floor sensor can be used
• Install floor sensor min 0,5m from the wall (cable can be
extended with up to 7m, min. 2x0,5mm² cable)
• Do not cover the thermostat, this will cause overheating
• All connections to the thermostat must be according to
national regulations and installed by authorized electri-
cians
• Power supply to the thermostat must be supplied through
30mA RCD and overload protected through
max.16A fuses.
6