Connecting Of Power Supply - Topens Rk2600 Bedienungsanleitung

with the opener cover on. Adjust the position of the magne t until the positions of the opening and closing meet
the requirement.
Important Note: Please note the two magnet brackets (fixed plate) are different: one is higher and the other is
lower.

Warning: Improper magnets installation may cause the gate crash into end
barrier, which is very dangerous !

Connecting of Power Supply

WARNING: NEVER connect the gate opener to the power outlet before all
the installations have been done.
The power supply cord should be at least 3×0.75mm2 (3C×18AWG). Connect the live
wire and neutral wire to the "L" (1#) and "N" (3#) terminal of the control board respectively; and connect the
earth wire to " " (2#) terminal of the control board.
NOTE: The power supply cord is not included in the package.
31