Key Automation TURBO SC4224 Anweisungen Und Hinweise Für Den Benutzer Seite 5

or rocks that could hinder the automation.
To prevent anyone from activating the gate
or door, before proceeding, remember to re-
lease the automation and clean only with a
cloth slightly dampened with water.
• Disposal: At the end of the automation use-
ful life, make sure that the dismantling is car-
ried out by qualified personnel and the ma-
terials are recycled or disposed of according
to local regulations in force.
• Operate the gate or door (with remote con-
trol, key switch, etc..); if everything is working
properly, the gate or the door will open and
close normally, otherwise the flashing light
flashes and the maneuver does not start.
With the safeties out of use, the automation
must be repaired as soon as possible.
Replacing the remote control battery: if your
remote control seems to work worse or not
work at all after a while, this may simply de-
pend on the exhaustion of the battery (de-
pending on use, it may take several months
to over a year). In that case, you will see that
the confirmation of transmission light does
not turn on, or comes on only briefly.
The batteries contain polluting sub-
stances: do not throw them in the
garbage but use the methods pre-
scribed by local regulations.
Thank you for choosing key Automation; for
more information feel free to visit our website
www.keyautomation.com.
ATTENTION !
A more recent version of the manual
supplied may be available for download
at www.keyautomation.com; check for
updates.
EN
5