Chapter 2 Installation; Instructions For The User; Installation Methods - Moretti Forni IF 30 Bedienungsanleitung

CHAPTER 2 INSTALLATION

2.1 Instructions for the user

The environment in which the machine must be installed must have the following characteristic:
· Be dry
· Water and heat sources at safe distance
· Adequate ventilation and lighting (corresponding to hygiene and security
rules following the existing laws.
The surface must be horizontal and smooth for the best cleanliness.
INFORMATION
The electric net must be provided with an automatic differential switch and this has to be
suitable to the machine. It is particularly important to have a good ground system and that
the electric tension and the frequency of the system correspond with the numbers of the
technical specifications described on the small plate at the back of the machine.

2.2 Installation methods

The machine is supplied in a closed package on wood pallet. Inside the package, in addition to
the machine, there are the protection covers for the rollers with a tool for assembling, the
instruction book and the declaration of conformity according to the directives of the machine.
The machine must be unloaded lifting it with an adequate equipment.
Use a trolley with wheels, to move the machine to the installing area.
Take out the machine from the package by adequate belts under the machine, take off the pallet,
and position the machine in the corresponding location, leaving a space of 50 cm. all around for
the usage, cleanliness and maintenance of the machine.
Assemble the protection covers with the included screws (PICT. 5).
WARNING
Before using the machine obligatory apply the protection covers supplied inside the package.
The manufacturer declines all responsibility for damages caused to things or persons if these
instructions are not followed.
Operating manual
25