ABBINA EH 6030 IX Gebrauchsanweisung Seite 18

GB
Turbo clean (quick cleaning)
Correct operation is combined with the use of the lateral panels and catalytic fan cover: the oven is treated with
special enamel with a micro-porous structure, which breaks down the fat projected thanks to a catalytic oxidisation
process which transforms residues into gaseous products.
The turbo clean function is only activated when no cooking function has been selected, so: switch on the oven and
touch the symbol as shown in the figure for five seconds.
The cleaning process takes place at a temperature of 250°C and lasts one hour. Do not use it for cooking
food!!
The oven light is activated and can be switched off and on again at any time.
All the self-cleaning panels will perform effectively for thirty cleaning processes, after this limit the panels must be
replaced.
The panels should be cleaned exclusively with tap water and replacements can be ordered from your specialised
dealer.
oven light control
The light control is active on all the cooking functions and is independent, meaning that it can be switched on or off
to suit your requirements, when you want!
The oven light is usually kept on throughout the heating time and then for three minutes after reaching the temperature
set. From then on, the oven light switches off to save power.
To check the cooking, it may be necessary to switch on the internal light. All you have to do is touch the light symbol:
the light will stay on for three minutes and then switch off automatically. Naturally you can switch it off immediately
by touching the light symbol again.
Some models are equipped with a door control. This feature uses sensor technology
to detect the position of the door to control the oven light: the opening of the door is indicated by a beep and the light
comes on. It switches off when the door is closed again.
5 sec.!!
18