X4-Life Security DIY Bedienungsanleitung Seite 27

» Now quickly open the Wi-Fi settings of your phone. The hub sends a network
signal labelled "SA...". Please connect to this network. The standard network
key is 12345678.
» Now open the An-Home app.
» Press the + symbol in the upper right corner and select "Cloud Security Alarm
System".
» Hit "search network". A device number will be displayed. Please press this
number. Now you can label the device. The standard password is 1234. Now
press the check mark in the upper right corner to execute the changes.
Please note
If the device is not found, please check if you are still connected to the Wi-Fi signal
of the hub. If not, repeat step 2.
3. Connecting the alarm system with your WiFi
» The home screen of the app now displays the connected device. Please
tap on it.
» Now you can see a settings symbol in the upper right corner. Touch it and
select "Wi-Fi settings".
» You can now enter the Wi-Fi SSID (network name) and the network key of your
home network. Please remember the correct spelling. Otherwise select
"Wi-Fi management" to scan available networks.
» Confirm your entry by tapping the check mark in the upper right corner.
Your unit is now connected to the network and the internet.
» If an error occurs or you are unable to control the unit with your smartphone,
you are probably no longer connected to the Wi-Fi signal of the smart hub.
In this case, go to the Wi-Fi settings of your smartphone and connect again
to the "SA..." network. Return to the app and try again.
» Your smartphone now has access to your alarm system from anywhere as
long as both devices are connected to the internet.
701552_Security-DIY_12x15-MAN.indd 27
DE EN
27
10.01.2017 10:37:51