Cleaning And Maintenance; Installation And Startup - X4-Life Security DIY Bedienungsanleitung

with electrical devices and/or packaging material. Do not leave the packaging
material lying around. Keep batteries and rechargeable batteries away from
children. Expired or damaged batteries can cause cauterization on contact with
the skin.
DANGEr! Danger to life!
This device should only be opened and/ or repaired by an expert or a
person who is qualified to do so. Only original spare parts may be used. If you
have doubts on the function or questions, please contact your local dealer or our
service center.
WArNING! Misuse may lead to property damage! Use indoors only.
Keep this product away from water or any other dampness. If the product
is moved from a cold to a warm room, condensation can occur within the unit.
Let the device reach room temperature, before using it.
The product may not be subjected to extreme heat or cold. Do not expose
the product to intense sunlight, open fire or other heat sources: Working
temperature: 0°C to 40°C.

Cleaning and maintenance

Always use a soft, dry and lint-free cloth to clean the unit's exterior. If the device
is extremely dirty you can use a soft cloth, dampened with water or a mild
cleaning solution to clean. Never use any abrasive or harsh cleaning agents
(e.g. alcohol, petrol or thinners) as these could damage the controls, casing,
accessories or any markings and labels found on the device.

Installation and startup

A wall holder allows to mount the motion sensor to the wall. The bracket can be
rotated in different directions.
Please note
Be careful while drilling or fastening screws in order to not damage wires or cords
24
701552_Security-DIY_12x15-MAN.indd 24 10.01.2017 10:37:51