HOMCOM YH-20-1 Montageanleitung Seite 3

20. CAUTION – Some parts of this product can become very hot and cause burns.
Particular attention must be given when children and vulnerable people are
present.
21. This product is fitted with a thermostatic room temperature control.
Only for UK:
A. Do not use two high-power appliances in the same socket.
B. The plug needs to be plugged in fully.
C. Product socket cannot use extension cord.
The socket needs to be conformed to BS1363, the maximum withstand current value
needs to be greater than 13A.
Location of Controls
1.Thermostat control knob (TEMPERATURE SETTING)- Adjust to maintain room temperature.
2.Flame switch - Switches flame effect and power on/off.
3.Heating setting: please press "
4.Heating setting : please press "
first press" ".
5.Flame dimmer control - Adjust to set flame intensity.
Lay stove upside down on a padded surface to avoid scratches to the surface of your stove.
Line up holes in the leg with holes in the underside of the stove body. With the use of the
screwdriver secure leg with the screws provided (3 screws per leg) as shown in the figure below.
" for 1000W.
"and " " at the same time for 2000w(can not operate without
3
WARNING: Do not use this heater with
missing, damaged, or broken legs.