Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
1. Filling The Clean Water Tank
1) Remove the clean water tank from the side of the unit. A security latch ( ① ) is positioned to
keep the clean water tank in position to avoid unintentional release. The latch will automatically
release when the tank is pulled upwards (Fig. 6).
2) Remove the clean water tank cover by releasing the clean water tank cover tab. Fill with warm
water (Max 40°C) and solution. Ensure the correct proportion of water and cleaning solution is
used by referring to the solution label (Fig. 7).
SMALL CLEANING AREA - 0.8L Liquid ( ② )
LARGE CLEANING AREA - 1.6L Liquid ( ③ )
Do not exceed filling the clean water tank over the maximum fill line indicated on the clean
water tank.
CAUTION: Do not fill with water above 40°C.
NOTE: A 236ml bottle of solution is provided with this carpet cleaner. Ensure the solution and
water are mixed correctly. We recommend only using Vacmaster
solutions may cause excess foaming and may invalidate your guarantee.
CAUTION: The cleaning solution can cause skin and eye irritation. Wash affected area
cautiously with water for several minutes. If irritation persists, seek medical attention
immediately. Individuals with sensitive skin should wear rubber gloves. Wash hands
thoroughly after use. Do not ingest. Keep out of reach of children.
3) Insert the locking tabs into the slots of the clean water tank and then secure the clean water
tank cover back into place until a click is heard (Fig. 8).
4）Slide the clean water tank back onto the unit. The security latch will automatically secure once
the clean water tank is in position. A click will be heard when correctly installed.
2. Using Your Machine
IMPORTANT: Before using the carpet cleaner, thoroughly vacuum the area to be cleaned. Always
test a small hidden area for colorfastness and pile distortion.
Test Colorfastness - Gently rub surface with a dampened white cloth containing cleaning solution.
Wait 10 minutes and check for color removal with a white paper towel. If color changes, do not
use.
NOTE: To prevent staining, please use plastic, wax paper or aluminum foil to protect wood or
metal surfaces from possible water spray.
To protect the wooden floors underneath rugs or carpet, place protective material (e.g. plastic)
underneath them before cleaning.
NOTE: Always refer to and follow the manufactures care guidelines before using cleaning solution
and carpet cleaner.
OPERATION
10
®
cleaning solution. Using other
Werbung
