Specifications; Names Of Parts - Sharp Rt-W600H Serviceanleitung

PLEASE REFER TO THE OPERATION MANUAL.
Power source: AC 11 OV/l27V/22OV/24OV, 50160 Hz
11 w
Power consumption:
7 ICS
Semiconductors:
32 Transistors
26 Diodes
W idth; 430 mm (17" )
Dimensions:
Height; 129 mm (5-l /I 6" )
Depth; 218 mm (8-9/l 6" )
Weight: 3.6 kg (7.9 Ibs.)
Compact cassette tape
Tape:
Tape speed: 4.75 cm/set. (l-7/8 ips.)
Wow &flutter: 0.09% (WRMS)
0.15% (DIN 45 511)
Frequency response:
40 Hz - 12,000 Hz (DIN 45 511)
Normal tape;
(50 Hz - 11,000 Hz t3 dB)
MAXELL UDXLII tape; 40 Hz - 13,000 Hz (DIN 45 511)
(50 Hz - 12,000 Hz +3dB)
1. Power Switch
2. Deck 1: Cassette Compartment
3. Deck 2: Cassette Compartment
4. Record Muting Button
5. Deck 2: Digital Tape Counter and Reset Button
6. Dolby NR Switch
7. Dubbing Speed Selector Switch
8. Source Selector Switch
9. Deck 1: Tape Selector Switch
10. Deck 2: Tape Selector Switches
11. Level Display Meter
13. Microphon Jacks
14. Headphones Jack
15. Deck 2: Pause Button
16. Deck 2: Stop/Eject Button
17. Deck 2: Fast Forward Button
18. Deck 2: Play Button
19. Deck 2: Rewind Button
20. Deck 2: Record Button
21. Deck 1: Pause Button
22. Deck 1: Stop/Eject Button
23. Deck 1: Fast Forward Button
24. Deck 1: Play Button
25. Deck 1: Rewind Button
26. Line Output Sockets
27. Line Input Sockets
28. Input Selector Switch
29. DIN Record/Playback Socket
30. AC Voltage Selector
31. AC Power Supply Cord
TDK Metal tape; 40 Hz - 15,000
S/N ratio (MAXELL UDXLII tape):
52 dB
Dolby NR off;
Dolby NR effect;
Microphones; 0.2 mV (2.2 kohms)
Line In; 50 mV (50 kohms)
Din In; 0.2 mV (2.2 kohms)
Output level and loaded impedance:
Headphones; 0.2 mW (" 0" dB), 8 ohms
Line Out; 550 mV (" 0" dB), 50 kohms
Din Out; 550 mV (" 0" dB), 50 kohms
Specifications for this model are subject to change without
orior notice,
Figure 2-l
26 28
Figure 2-2
(D 45 51 )
IN I
HZ
3 4 5 6 7 8 9 1 0 1 1
I I