Storage and Care
Folding for storage
When the running board is in its horizontal posi-
tion, fully slacken the locking gas spring (part 1)
and lift the main frame to the vertical.
No need to use an extra fixing knob to situated
on the upper right handle support. You can now
tilt the treadmill towards you and wheel it into
the desired position.
Belt adjustment
Your treadmill belt has been adjusted at the fac-
tory but each user has a tendency to be "Right"
or "Left" footed. If the belt moves to either side, it
needs to be adjusted. There are two adjustment
bolts at the rear of the unit (see Fig.3).
Tighten by half a turn the bolt on the side towards
which the belt has shifted and correspondingly
loosen the bolt on the other side. Rotate the belt
smoothly to ensure that it is correctly centered - if
not,repeat the adjustment.
13