Fujitsu D3003-S1x Handbuch Seite 10

Internal connectors and slots
List of onboard Features
Internal Connectors
DIMM Sockests (DDR3 1066/1333, SO-DIMM)
PCI Express x16 Slot
PCI Express x1 Slot
PCI Slot (32bit, 33 MHz, Rev. 2.3)
Frontpanel Audio (9-pin, Intel standard header)
Specific socket for internal USB Stick
Serial (FIFO, 16550 compatible)
Intrusion (Case Open)
Feature Connector (General Purpose I/O)
USB (2.0, ~480 Mbit/s, 2 channels per
connector)
Frontpanel (Power Switch, LEDs, Intel 10 pin
header)
Dual channel LVDS / Backlight Control
Onboard Power Output (+5 V / 2 A, +12 V / 2 A)
for drives
Onboard (internal input) DC-IN 19-24 V / 3 A
External Connectors
Audio In / Line Out (or driver configuration) /
Microphone In
PS/2 Mouse / Keyboard
USB (2.0, ~480 Mbit/s)
Serial (RS232, FIFO, 16550 compatible)
DC-IN (external input) 19-24 V / 3.25 A
1) Maximum supported Transfer Rate per Port
Power Supply Requirements - for onboard components (worst case)
Source
D3003–Sxx
Main Power Supply
Voltage
19 V - 24 V
D3003-S1x D3003-S2x
2
-
proprietary x2 proprietary x2
1
shared with shared with
external, so external, so
only one only one
device on device on
COM2 allowed COM2 allowed
2
/
1 / 1 / - 1 / 1 / -
/
4
2 (COM2 2 (COM2
shared with shared with
internal)
Maximal variation
+10 % / -15 %
Fujitsu Technology Solutions
D3003-S3x
2
-
proprietary x2
1
shared with
external, so
only one
device on
COM2 allowed
2
- / -
1 / 1 / -
/
4
2 (COM2
shared with
internal) internal)
Mainboard current
typical
1 A
2
-
1
2
/
/
4