Door Open Alarm; Cleaning And Maintenance - Inventum Skv4180B Benutzerhandbuch

Super freezing
Use this mode when the appliance is getting warmer and no longer cools properly due to extremely hot weather, frequently
opening the door or placing a large quantity of food in the appliance at once.
In order to restore the cold temperature, select the super freezing mode.
When this mode is selected, the temperature of the freezer section automatically drops to -25 °C for a maximum period
of 50 hours. After this, the temperature returns to the preset temperature.
To activate the super freezing mode, press the MODE key until the super freezing symbol starts to flash.
To switch off the mode, press the MODE key until the symbol no longer lights up.
Note: use the super freezing mode if you want to freeze a lot of food at the same time. Freezing will go faster, the nutrients
will be preserved and you are able to store the food for a long time.

DOOR OPEN ALARM

If one or both upper doors are open for more than 60 seconds, an alarm will sound indicating that a door is open. Always
close the doors as quickly as possible, or press a random key on the control panel to switch off the alarm. If a door remains
open for too long, the food could spoil.
5

cleaning and maintenance

Before cleaning the appliance, switch it off by removing the plug from the wall socket.
Clean the interior of the appliance. Use warm soapy water with, for instance,
washing-up liquid, all-purpose cleaner or soda in order to prevent nasty smells.
Wipe the inside of the appliance after cleaning with clean water and properly
wipe everything dry. Leave the appliance to dry for 1 to 2 hours.
The shelves, drawers and door compartments can be removed from the
appliance easily and washed by hand. These components may not be cleaned
in the dishwasher.
For areas in the appliance that are difficult to clean, such as small openings or corners, it is recommended wiping them clean
regularly with a soft cloth or brush. If necessary, a tool can be used, such as thin sticks (cocktail sticks, for example), to make
sure no contamination can occur in these areas.
Clean the outside of the appliance and the door rubbers with a soft damp cloth.
Clean the rear of the appliance at least one per year with a vacuum cleaner so that the condenser and ventilation holes
remain clean and the refrigerator is able to function as optimal as possible.
Do not use hard brushes, steel wool, abrasives (such as toothpaste), organic solvents (such as alcohol, acetone, oil, etc.),
boiling water, acid or alkaline product to clean the appliance, as this could damage the surface and interior of the appliance.
Boiling water and benzene could deform or damage plastic components.
Defrosting
The entire appliance is free from frost - no-frost. If used correctly, no ice will be formed.
If an ice layer is created after all, defrost the freezer section when the ice layer has reached a thickness of 3 mm. Remove
all products from the freezer section. Store the frozen products on a cool location, packaged in newspapers and blankets.
Remove the plug from the socket and keep the door of the cooler section closed while defrosting the freezer section.
Defrost the freezer section Defrosting can be accelerated by placing a tray with hot water in the freezer section.
Do not use sharp metal objects to scrape the freezer section clean, use a plastic ice scraper.
Clean and dry the freezer section. Insert the plug in the socket and set the thermostat to the required setting.
Place the frozen products back in the freezer section once it has reached the required temperature.
Warning: Never remove ice with sharp objects, defrosting sprays, a hair dryer, a heater or something similar.
This could lead to unsafe situations and cause irreparable damage to the appliance
Replacing the LED lamp
This appliance has been provided with a LED lamp. This lamp lasts for a longer period of time. When the
LED lamp in the appliance is broken, you are not able to replace it yourself. Contact the Inventum service
LED LED
department.
26
• English