Environmental Protection - Inventum Skv4180B Benutzerhandbuch

ENVIRONMENTAL PROTECTION

The appliance is energy-efficient. Save even more energy by using the appliance in accordance with the following energy
saving tips and instructions for an environmentally friendly disposal of the appliance.
Saving energy
• A high ambient temperature has a negative effect on energy consumption. Direct sunlight and other heat sources near
the appliance can also have a negative effect.
• Keep ventilation holes free. Covered and dirty holes cause a high energy consumption. Ensure sufficient space around
the appliance, so that a ventilation and air flow is able to circulate around the appliance properly.
• Do not open the doors of the appliance more often than necessary and leave the doors open as briefly as possible.
• The distance between the shelves and the rear wall ensures a free air circulation. Do not place food products against the
rear wall.
• Set the thermostat to a lower setting if circumstances allow.
• Allow prepared food that you want to store in the appliance to cool down to room temperature before placing it in the
appliance.
• A door rubber that does not seal properly may increase energy consumption. Therefore, have it replaced in time by
a competent person.
• If the instructions are not observed, this could lead to a higher energy consumption.
Environmentally friendly disposal
Recycling - WEEE
• Dispose the packaging material in an environmentally friendly way.
• This appliance is labelled in accordance with European Directive 2012/19/EU on waste electrical and electronic
equipment (WEEE). The directive sets the framework for returning and recycling used equipment as applicable
across the EU.
Dimensions and free surrounding area
• Maintain sufficient free space at the front to be able to open the door.
• Leave minimum 100 mm of free space at both sides.
Caution: the appliance is not suitable for use as a built-in appliance.
H
A 795
B 740
C 1800
D min = 100
E min = 50
F min = 100
G 1580
H 1530
I 135°
21
English •