Temperature Display - Inventum Skv4180B Benutzerhandbuch

4-türiger kühl- und gefrierschrank

Inhaltsverzeichnis

Verfügbare Sprachen

RUBBER BUFFERS

Each door has a rubber buffer. It ensures that the door closes softly.

Do not remove the buffers. If one is missing on the door, you can take one from the accessory bag and place

it on the door.

Caution: keep small parts such as buffers out of reach of children to prevent them from swallowing these parts.

use

Check that the voltage corresponds with the voltage stated on the information plate and insert the plug in the socket.

The control unit of the appliance is located on the outside of one of the doors.

Keys

A. Setting the temperature of the cooler section

B. Setting the temperature of the fresh food drawer

C. Setting the temperature of the freezer section

D. Indicators - extra function (ECO, holiday, super freezing)

E. Locking/unlocking and function

Display

1. Cooler section temperature

2. Freezer section temperature

3. Variable zone temperature

Important: the control panel will only light up when a key is pressed or one of the doors is opened. When opening one of the

doors, a signal will sound and the display will light up for approx. 2 minutes. For the remainder of the time the control panel

will be on standby and not light up.

Important: the control panel locks automatically. When no keys are pressed for a period of 25 seconds, the control panel

will lock automatically. You can only use the functions below if the control panel is unlocked. Once the control panel is

locked, the lighting of the display will switch off after approx. 2 minutes.

Instruction: the recommended temperature setting is 4°C. For the freezer section this is -18°C.

Instruction: The ambient temperature, the frequency of opening the door and the position of the appliance have an effect

on the temperature in the appliance. Take this into account when setting the thermostat.