Attention Risk of damage!!
Do not use any strong or abra-
sive solvents or scouring pads
as such products attack the
grill's surfaces and leave per-
manent markings.
Assembly
Preparation
Danger Risk of injury!
Failure to follow these instruc-
tions can lead to problems and
risks while using the grill.
– Follow each assembly step described
here.
1. First, read the assembly instructions
thoroughly.
2. Allow yourself enough time for as-
sembly and find an even working
space of two to three square meters.
3. Small parts such as handles may be
pre-assembled.
Required tools
1 x Phillips screwdriver
1 x adjustable wrench
Alternatively, you can use pliers instead of
the spanner to hold nuts in position.
P1700716_TEPRO_1135_Schwenkgrill_Cary_DE_GB_20170927.indd 15
Assembling the grill
Unpack the grill and dispose of all
packaging materials. Keep the packaging
materials out of the reach of children
and dispose of them according to the
applicable regulations after completing
the grill assembly.
1. Push leg caps (11) on the top of legs
(1) and then connect the legs with
firebowl (2) using washers (C) and
bolts (D).
2. Attach bottom rack (15) between legs
(1) using bolts (B) and nuts (E).
3. Bolt the chain roller together (refer to
the small drawing in the box). Then
mount the chain roller using bolt (H)
and wing nut (F) to plate (9).
4. Affix leg elements (3) to plate (9) using
bolts (A).
5. Attach stiffening strut (6) between leg
elements (3) using nuts (E) and safety
nuts (G).
6. Bolt leg elements (3+4+5) together us-
ing clamps (14), bolts (B) and nuts (E).
7. Fasten all bolts tight.
8. Hook chain (10) to grate (7) and pull
it over chain roller (13), then attach
it using the S hook at the end of the
chain (10).
9. Push top cap (12) on.
10. The grill is now ready for use.
11. If necessary, disassemble the grill in
reverse order.
Important: All bolts must be fastened
tight.
15
27/9/2017 11:49 AM