Firmware Upgrade Service; Specifiation - Harman Jbl Rallybar S Bedienungsanleitung

7.10 Firmware Upgrade Service

Button Press

8. SPECIFIATION

Product Description
Transducers:
Output Power:
THD at Rated RMS Power:
Voltage Range:
Quiescent Current Draw:
Maximum Current Draw:
Frequency response:
Signal-to-noise Ratio:
Cable type
Cable length
Bluetooth Version
®
Bluetooth Profile
®
Bluetooth transmitter
®
frequency range
Bluetooth transmitter power ≤ 15 dBm (EIRP)
®
Aux-In
Aux-Out
USB Drive File System
USB Drive Maximum
Capacity
Soundbar Housing Dimension
(L x W x H)
Soundbar Dimension
(L x W x H)
Soundbar Weight
Packaging dimensions
(W x H x D)
Gross weight
Behaviors
Firmware version check
10S
firmware upgrade
1S
RALLYBAR
21" Bluetooth Universal Outdoor
®
Vehicle Soundbar with LED lights
and 150Wrms amplifier
4 x 2.75" (70mm) woofers;
2 x 1" (25mm) Tweeters;
2 x 7.2" (182.8mm) x 3" (76.2mm)
Racetrack Passive Radiators
150WRMS; 300W PEAK (IEC60268) 150WRMS; 300W PEAK (IEC60268) 300WRMS; 600W PEAK (IEC60268)
<1%
9.6 - 16VDC
<0.9A
25A
45Hz-40kHz
> 80 dB
12AWG.
12 Feet (3.66m)
5.3
A2DP V1.3, AVRCP V1.6
2400 MHz – 2483.5 MHz
2Vrms (0.35Vrms - 2Vrms);
4Vrms (0.7Vrms - 4Vrms);
6Vrms (1.05Vrms - 6Vrms):
(3.5 mm connector)
2 Vrms (3.5 mm connector)
FAT16, FAT32
64GB
21-5/32" x 5" x 4-5/8"
(537.5 x 126.7 x 118mm)
21-5/32" x 5-5/16" x 4-5/8"
(537.5 x 135.2 x 118mm)
11.57 lbs (5.25 kg)
24" x 9" x 7.6"
(611 x 229 x 193mm)
17.14 lbs (7.79 kg)
1. Firmware Version Check:
When main power switch is on and soundbar in operation
mode, Press and hold "volume down" & "BT" button at same
time over 10 seconds, the machine voice out the firmware
version number
2. Firmware Upgrade by U Disk (Flash drive)
1) Download the latest firmware to a USB stick (the USB Disk
file system need to be FAT32 or FAT16) and plug the USB
Stick into USB port.
2) Make sure the main power switch is off. Press and hold the
"volume up" & "BT" button at same time then turning on the
main power switch, after 1 second, release hand from the
"volume up" & "BT" buttons to trigger the firmware upgrade.
Note:
- You can download the latest firmware on JBL Website
(www.JBL.com) If there is new firmware release
RALLYBAR S
21" Bluetooth Universal Outdoor
®
Vehicle Soundbar with 150Wrms
amplifier
4 x 2.75" (70mm) woofers;
2 x 1" (25mm) Tweeters;
2 x 7.2" (182.8mm) x 3" (76.2mm)
Racetrack Passive Radiators
<1%
9.6 - 16VDC
<0.9A
25A
45Hz-40kHz
> 80 dB
12AWG.
12 Feet (3.66m)
5.3
A2DP V1.3, AVRCP V1.6
2400 MHz – 2483.5 MHz
≤ 15 dBm (EIRP)
2Vrms (0.35Vrms - 2Vrms);
4Vrms (0.7Vrms - 4Vrms);
6Vrms (1.05Vrms - 6Vrms):
(3.5 mm connector)
2 Vrms (3.5 mm connector)
FAT16, FAT32
64GB
21-5/32" x 5" x 4-5/8"
(537.5 x 126.7 x 118mm)
21-5/32" x 5-5/16" x 4-5/8"
(537.5 x 135.2 x 118mm)
11.46 lbs (5.2 kg)
24" x 9" x 7.6"
(611 x 229 x 193mm)
17 lbs (7.74 kg)
9
RALLYBAR XL
35" Bluetooth Universal Outdoor
®
Vehicle Soundbar with LED lights
and 300Wrms amplifier
8 x 2.75" (70mm) woofers;
2 x 1" (25mm) Tweeters;
4 x 7.2" (182.8mm) x 3" (76.2mm)
Racetrack Passive Radiators
<1%
9.6 - 16VDC
<0.9A
40A
45Hz-40kHz
> 80 dB
10 AWG.
12 Feet (3.66m)
5.3
A2DP V1.3, AVRCP V1.6
2400 MHz – 2483.5 MHz
≤ 15 dBm (EIRP)
2Vrms (0.35Vrms - 2Vrms);
4Vrms (0.7Vrms - 4Vrms);
6Vrms (1.05Vrms - 6Vrms):
(3.5 mm connector)
2 Vrms (3.5 mm connector)
FAT16, FAT32
64GB
35-11/32" x 5" x 4-5/8"
(897.5 x 126.7 x 118mm)
35-11/32" x 5-5/16" x 4-5/8"
(897.5 x 135.2 x 118mm)
20.83 lbs (9.45 kg)
38.2" x 9" x 7.6"
(971 x 229 x 193mm)
27.5 lbs (12.52 kg)
EN