Rgb Lights Diy Setting; Broadcast Mode - Harman Jbl Rallybar S Bedienungsanleitung

Button Press
RGB Light Brightness Setting Mode
Button Backlights Status
Power off
Off
In operation mode
White (Constant)
1. In RGB Light DIY menu mode
White (Flashing)
2. In RGB Brightness menu mode
RGB Light Brightness Adjustment Level
Level 1: Minimal
Level 2: 50% Brightness
Level 3: 70% Brightness
Level 4: Max Brightness
1. Press and hold and
to enter or exit from RGB lights brightness menu mode
2. Short press to increase the brightness level; press
decrease from current brightness level
3. press to save the Brightness selection and exit from the
Brightness menu mode
Notes:
- When in RGB lights brightness menu mode, the backlights of the
, and buttons will be white flashing status.
- There are 4 levels brightness selection: Minimal, 50%, 70%, Max
RGB LIGHTS OPTIONS
- The brightness level selection is for all RGB lights patterns.
- If there is no action in the brightness menu mode over 2 minutes,
RGB lights brightness menu mode will automatically exit but
brightness adjustment will not be saved.
- Press and buttons simultaneously 2 seconds to exist,
brightness adjustment will not be saved.
- Only press button to confirm, then the brightness adjustment
could be finally saved.
- If press the main power switch to shut down the speaker directly,
the brightness adjustment will not be saved properly for next
time usage, only user press the power button to enter the deep
standby mode first then press the main power switch to shut
down power, then DIY setting will be finally saved.

7.4 RGB Lights DIY Setting

Button Press
RGB Light DIY Setting Mode
Button Backlights Status
Power off
Off
White (Constant) In operation mode
In RGB Light DIY menu mode
White (Flashing)
In RGB Brightness menu mode
Behaviors
buttons simultaneously 2 seconds
RGB Light
Behaviors
Off
White (Constant)
Blue (Constant)
1. Rock
2. Flow
3. Cross
4. Ripple
5. Static
6. Mix
1. Press and
exit RGB Lights DIY menu.
2. Press or
to
Flow, Cross, Ripple, Static and Mix.
3. Press button to confirm the pattern selection and enter the
Primary Color Zone menu at the same time
4. Press or
Aquamarine, Blue, Green, Orange, Purple, Red, White, Yellow
and Off.
5. Press button to confirm the Primary color selection and
enter the Secondary Color Zone menu at the same time.
6. Press or
Aquamarine, Blue, Green, Orange, Purple, Red, White, Yellow
and Off.
7. Press button to confirm the secondary color selection and
exit RGB Lights DIY menu.
Notes:
- When in RGB lights DIY menu mode, the backlights of the
and buttons will be white flashing status, the backlight of
button will be constant Blue at the same time.
- If there is no action in the RGB lights DIY menu mode over
2 minutes, RGB lights DIY menu mode will automatically exit but
DIY setting will not be saved.
- Press and
brightness adjustment will not be saved.
- Only press
finally saved and exit.
- Latest saved DIY setting will cover the previous DIY setting. there
is only one latest pattern to be saved under DIY pattern.
- If press the main power switch to shut down the speaker directly,
the DIY adjustment will not be saved properly, only user press
the power button to enter the deep standby mode first then
press the main power switch. The DIY setting will be finally saved
for next time.

7.5 Broadcast Mode

Broadcast Mode allows you to play your audio through multiple
soundbar speakers. The backlights of
blue when soundbar on Broadcast Mode
Button Backlights Status
Blue (Constant)
7
Power off
In operation mode
In RGB Light DIY menu mode
1. Aquamarine
2. Blue
3. Green
4. Orange
5. Purple
6. Red
7. White
8. Yellow
9. Off
buttons simultaneously 2 seconds to enter or
buttons to choose from 6 Light pattern: Rock,
buttons to choose from 9 Light colors:
buttons to choose from 9 Light colors:
buttons simultaneously 2 seconds to exit,
button to confirm, then the DIY setting will be
button will be constant
Broadcast mode on
1. Aquamarine
2. Blue
3. Green
EN
4. Orange
5. Purple
6. Red
7. White
8. Yellow
9. Off
,