Herunterladen
Teilen
Diese Seite drucken
  1. Anleitungen
  2. Marken
  3. peerless-AV Anleitungen
  4. Regale und Aufbewahrungen
  5. MOD-FCS2KIT300-B
  6. Bedienungsanleitung

peerless-AV MOD-FCS2KIT300-B Bedienungsanleitung Seite 7

Vorschau ausblenden
1-1
OPTIONAL: Cut pole to desired length. Cut end must be perpendicular to pole within 1/16" (1.5mm). Must
ENG
use drill template MOD-ADF (sold separately) to drill new holes in pole. Refer to accompanying instructions.
OPTIONAL: Cut pole to desired length. Cut end must be perpendicular to pole within 1/16" (1.5mm). Must
ESP
use drill template MOD-ADF (sold separately) to drill new holes in pole. Refer to accompanying instructions.
OPTIONAL: Cut pole to desired length. Cut end must be perpendicular to pole within 1/16" (1.5mm). Must
FRN
use drill template MOD-ADF (sold separately) to drill new holes in pole. Refer to accompanying instructions.
OPTIONAL: Cut pole to desired length. Cut end must be perpendicular to pole within 1/16" (1.5mm). Must
DEU
use drill template MOD-ADF (sold separately) to drill new holes in pole. Refer to accompanying instructions.
NEL
OPTIONAL: Cut pole to desired length. Cut end must be perpendicular to pole within 1/16" (1.5mm). Must
use drill template MOD-ADF (sold separately) to drill new holes in pole. Refer to accompanying instructions.
ITL
OPTIONAL: Cut pole to desired length. Cut end must be perpendicular to pole within 1/16" (1.5mm). Must
use drill template MOD-ADF (sold separately) to drill new holes in pole. Refer to accompanying instructions.
ČEŠ
OPTIONAL: Cut pole to desired length. Cut end must be perpendicular to pole within 1/16" (1.5mm). Must
use drill template MOD-ADF (sold separately) to drill new holes in pole. Refer to accompanying instructions.
OPTIONAL: Cut pole to desired length. Cut end must be perpendicular to pole within 1/16" (1.5mm). Must
SLK
use drill template MOD-ADF (sold separately) to drill new holes in pole. Refer to accompanying instructions.
OPTIONAL: Cut pole to desired length. Cut end must be perpendicular to pole within 1/16" (1.5mm). Must
POR
use drill template MOD-ADF (sold separately) to drill new holes in pole. Refer to accompanying instructions.
TÜR
OPTIONAL: Cut pole to desired length. Cut end must be perpendicular to pole within 1/16" (1.5mm). Must
use drill template MOD-ADF (sold separately) to drill new holes in pole. Refer to accompanying instructions.
1-2
ENG
X = Distance from fl oor to ceiling.
ESP
X = Distancia desde el suelo hasta el techo.
FRN
X = Distance entre le plancher et le plafond.
DEU
X = Abstand vom Boden zur Decke.
NEL
X = Afstand van vloer tot plafond.
ITL
X = Distanza dal pavimento al soffi tto.
X = Vzdálenost od podlahy po strop.
ČEŠ
X = Vzdialenosť od podlahy po strop.
SLK
X = Distância do chão ao teto.
POR
X = Yerden tavana kadar mesafe.
TÜR
B
X
7
ENG
CEILING
ESP
TECHO
FRN
PLAFOND
DEU
DECKE
PLAFOND
NEL
SOFFITTO
ITL
STROP
ČEŠ
STROP
SLK
TETO
POR
TAVAN
TÜR
ENG
FLOOR
ESP
SUELO
FRN
PLANCHER
DEU
BODEN
NEL
VLOER
ITL
PAVIMENTO
PODLAHA
ČEŠ
PODLAHA
SLK
CHÃO
POR
ZEMİN
TÜR
2014-01-31
#:203-9370-1
loading

Verwandte Anleitungen für peerless-AV MOD-FCS2KIT300-B

Verwandte Produkte für peerless-AV MOD-FCS2KIT300-B

Diese Anleitung auch für:

Mod-fcs2kit300