Safety Informations; Environmental Protection - BGS technic 8998 Bedienungsanleitung

SAFETY INFORMATIONS

•
Keep children and other persons away from the working area.
•
Do not allow children to play with this tool or its packaging.
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Be careful when working on running engines. Loose clothing, tools and other objects can be
caught by rotating parts and cause serious injury.
•
Be careful when working on hot engines because of the risk of burn injuries!
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
•
After repair or before starting the engine, turn a minimum of 2 turns by hand and check the
timing again.
•
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
•
Do not use locking tools for camshaft and crankshaft as a counter-holder, during loosening or
tightening screws on pulley, camshaft or crankshaft. This can damage tools and engine
components. Only use tools that are suitable for this purpose.

ENVIRONMENTAL PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories
and packaging should be sorted, taken to a recycling centre and disposed of in a manner
which is compatible with the environment. Contact your local solid waste authority for
recycling information. Dispose of this product at the end of its working life environmentally.
PREPARATION
The delivered camshaft adjustment tool is divided into 2 parts (fig.1) and must be assembled before
use. For this purpose connect the two parts (fig.2) and tighten the screw (fig.3).
Fig.1
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Fig.2
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Fig.3
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed