Product Introduction; Charging Instructions - Depstech Ds260 Bedienungsanleitung

EN
2
1 • Hold this button for 2s to power on/off the endoscope.
2
• Click to zoom out.
3
• Click to adjust the brightness of the LEDs.
4 • Click to zoom in.
5 • Type-C Charging Port
For charging (Type-C cable connected to the adapter)
6
• Charging Status LED indicator
Red LED indicator stay on: Charging status
Green LED indicator stay on: Charging finished
7 • Reset Button
Short click the reset button to shut down the device
1. Connect the device to the DC 5V adapter for charging;
2. The indicator will stay on red when the device is being charged, and will turn
green when fully charged.

Product Introduction

3 4
1

Charging Instructions

- 02 -
5
6
7