Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Supported devices & minimum requirements
FR
DE
In order to install and use your ScanWatch 2, you will need a smartphone or tablet operating on iOS (15.0 or higher) or Android (9.0 and
higher). Thereafter, the product can be used without your mobile device close by, thanks to Bluetooth connectivity. You will need your device
to synchronize your results and view them in the Withings app.
Materials
List of materials that will potentially come into contact with the skin during usage: Fluoelastomer, leather, sapphire glass, stainless-steel, rose
gold, titanium, ceramic. Note that your wristband should be cleaned regularly. For cleaning instructions, please visit withings.com/support/
scanwatch-2. In case of skin irritation, we advise you that you contact a dermatologist before you resume wearing your ScanWatch Nova.
Skin reactions can also be caused by: - An allergic reaction to the materials used in the back casing of the watch.
Note that ScanWatch Nova is in compliance with the photobiological lamps standards (IEC EN 62471).
Warnings
The battery inside the watch will stop charging when the temperature is less than -10°C (+/-5°C or ) or over 50°C (+/-5°C).
Technical specifications
Power source: 3.87 Vdc Lithium ion battery (Use the charging cable and Withings hwa10 watch charger ASM-13639 5 VDC 500mA)
(included) and a DC 5V power adapter that was certificated by IEC 60601-1.
- A photosensitizing medication.
Werbung
