EN - Safety information
Product liability and limitation of liability
Safe operation and function of the devices can be impaired in the situations
outlined below. In the event of malfunctions, damage, consequential damage,
costs, or expenses associated directly or indirectly with the use of the safety
information and instructions or the products that they describe, liability shall
transfer to the operator/user in the following cases:
•
The system devices are not installed, used, maintained, or cleaned in
accordance with the instructions
•
The system devices are not used within the scope of proper use
•
Unauthorized modifications are carried out on the system devices by
the operator.
DANGER
Risk of electrocution: All ekey devices are to be operated with Safety Extra
Low Voltage (SELV). Only use power supplies rated protection class 2 with safety
approval according to EN 62368-1.
Failure to do so will create a risk of fatal electrocution.
Only certified electricians are authorized to carry out electrical installation work
on mains systems.
ATTENTION
Property damage in the event of incorrect mounting and wiring:
The system devices are operated using electricity.
They could be destroyed if they are mounted and wired incorrectly.
Mount and wire the system devices correctly before connecting the power.
Using the Li-ion rechargeable battery (if provided)
DANGER
Risk of fire due to unsuitable power supplies: Only recharge the
rechargeable battery using the power supply provided by ekey biometric systems
GmbH.
Using a power supply that is unsuitable for the rechargeable battery supplied will
present a risk of fire.
Only use the power supply intended for your ekey system.