Installation And Commissioning; Unpacking And Setting Up; Connecting The Devices; Connecting Cables - Xylem SI Analytics AVS 470 Gebrauchsanleitung

40
2

Installation and Commissioning

2.1

Unpacking and setting up

The installation of the AVS
conducted by a trained service technician.
Please observer the operating voltage! It is indicated on the type plate (back side of the device).
The device may be placed and operated on a plane surface.
We recommend placing on the VZ 8571.
Up to two devices may be stacked.
2.2

Connecting the devices

Connecting cables

2.2.1
Description
TZ 3086 Printer cable
®
470 and the connection of the desired additional devices are generally
Length Connects:
®
1.5 m AVS 470
to:
Printer Z 910