Inhaltsverzeichnis
Werbung
36
TUNE control (4):
PROCESS control (5):
HIGH MIX control (6):
Surround processor bypass switch (7):
Surround processor control (8):
Controls the lower operating frequency
of the mid-high tone processor.
Control range: 1 – 8 kHz
Controls the effect characteristic of the
mid-high tone processor.
The further the control is turned clockwi-
se, the more transparent and brilliant,
but also sharper, the sound.
The setting depends on the type of sig-
nal to be processed and the sound pre-
ferred by the user.
For acoustic instruments and classical
music, the control should be set in the
ENHANCER area, for electronic instru-
ments it is better in the EXITER area.
Controls the effect level of the mid-high
tone processor
Activates the surround processor
IN setting:
Processor switched on
OUT setting:
Processor switched off and the signal is
transmitted unprocessed.
The surround processor can also of
course only be properly used with a ste-
reo signal. When two different monosig-
nals are being processed it should
always remain switched off (OUT set-
ting), because otherwise mutual interfe-
rence between the different channels
occurs (reduced channel separation).
The surround processor functions only if
the other processors are also switched
on (sound processors bypass switch (1)
in IN setting).
Controls the effect level of the surround
processor.
25
Werbung
Inhaltsverzeichnis
