GYS VENUS 9-13G TRUE COLOR Bedienungsanleitung Seite 8

Translation of the original instructions
PRECAUTIONS
• The welding helmet is suitable for use with virtually all welding processes except Oxy-Acetylene welding, laser welding and gas wel-
ding.
• Standard protective screens must be installed on both inside and outside surfaces of the module. Failure to use protective screens
may constitute a safety hazard or result in irreparable damage to the module.
HEADBAND ADJUSTMENT
The VENUS 9/13 TRUE COLOR is equipped with a headband which can be adjsuted in multiple ways to suit the welder: width, height (1), longitudinal inclination (3) and adjust-
ment (2).
MAINTENANCE
• Expiration date : No expiration date for this product but the state of the VENUS 9/13 TRUE COLOR welding helmet must be
checked before each use.
• The welding helmet must not fall down.
• Do not use any tools or other sharp objects to remove any components of filter or helmet. Doing so may damage filter or helmet
preventing proper function, possibly causing injury or cancellation of the warranty.
REPLACING THE EXTERNAL PROTECTIVE SCREEN
1
2
The outer protection screen (2) can be removed by placing a finger
under the screen on (A) of the helmet (1).
When changing the screen, make sure that the protective film
(3) has been removed. This film must be removed only when the
3
protection screen is in position in the helmet.
A
REPLACING THE INTERNAL PROTECTIVE SCREEN (10)
A
The internal protection screen (10) is removable by sliding it down by placing a finger on (A).
10
When changing the screen, make sure you remove the protective screen (11)
11
VENUS 9-13 G TRUE COLOR
Clear shade 3
Dark shade 9-13
Filter dimension 110 x 90 x 8 mm
Reaction speed 0,08 ms
Power supply solar + batteries (x2 CR2032)
Weight 470 gr
Field of vision 92 x 42 mm
Applications MMA 10>400 A / TIG 10>300 A / MIG-MAG 10>400 A
Warranty 2 years
Application temperature -5°C / + 55°C
Storage temperature -10°C / + 60°C
3
1
2
8
EN