Inhaltsverzeichnis
Werbung
System-Upgrade
Es gibt zwei Wege, ein Update des Systems durchzufüh-
ren:
1. Im Menü für Einstellungen, wie bereits zuvor in der Be-
dienungsanleitung beschrieben worden ist.
2. Über das „Firmware Upgrade Tool" auf der im Lieferum-
fang enthaltenen CD.
Die einzelnen Schritte
1. Schalten Sie den Player aus. Drücken Sie die Taste „ Ñ ;"
und halten Sie diese gedrückt. Schließen Sie dabei Ihren
Player mittels USB-Kabels an Ihren Computer.
2. Der PC erkennt (Beim Betriebssystem Windows!) ein
„Rock USB Device" und verlangt die Installation des Trei-
bers. (Wenn der Treiber bereits installiert worden ist oder
ein Windows neueren Typs ( ab XP, 2000), dann kann dieser
Schritt ausgelassen werden).
3. Nachdem der Treiber installiert worden ist starten Sie das
„Firmware Upgrade Tool" in der beigelegten CD.
Kapitel 15
System-Upgrade
1
to the device to transfer files to the portable media player that you will now be able to
1 6. System Update
watch.
There are two ways to upgrade system firmware:
1 6. System Update
1). Select "Settings→System→Upgrade" in the main menu and upgrade firmware by
following the instructions as seen on display. For detailed information, please refer to
There are two ways to upgrade system firmware:
Section 12: Settings>System Setting> Upgrade.
1). Select "Settings→System→Upgrade" in the main menu and upgrade firmware by
2). Upgrade firmware by using the "Firmware Upgrade Tool" on the enclosed CD.
following the instructions as seen on display. For detailed information, please refer to
Section 12: Settings>System Setting> Upgrade.
Steps:
2). Upgrade firmware by using the "Firmware Upgrade Tool" on the enclosed CD.
A) To turn the player off, press and hold the "
connect the player to a computer via USB cable.
Steps:
B) After the player is connected your computer will search for "USB Device installation" and
A) To turn the player off, press and hold the "
require driver installation. To install, follow the instructions for driver installation as seen on
connect the player to a computer via USB cable.
screen.（If the driver has been installed, just skip this step）.
B) After the player is connected your computer will search for "USB Device installation" and
C) After the driver has been installed, run the "Firmware Update Tool" with the enclosed CD.
require driver installation. To install, follow the instructions for driver installation as seen on
screen.（If the driver has been installed, just skip this step）.
C) After the driver has been installed, run the "Firmware Update Tool" with the enclosed CD.
D). Click on "Open" and select a firmware file.
E). Click on "Update" to start upgrading.
D). Click on "Open" and select a firmware file.
E). Click on "Update" to start upgrading.
F) After upgrading is completed, exit the program by clicking on "Exit" and disconnect the
player from your computer.
F) After upgrading is completed, exit the program by clicking on "Exit" and disconnect the
player from your computer.
" button, do not release it. Now you can
" button, do not release it. Now you can
4.Öffnen Sie das „Firmware Update Tool" auf der CD. Im
Ordner /Firmware und klicken Sie auf Update um ein Up-
date durchzuführen.
5. Nachdem das Upgrade auf die neue Firmware durchge-
führt worden ist, trennen Sie den Player wieder vom PC
und starten Sie den Player neu.
Kapitel 15
System-Upgrade
Werbung
Inhaltsverzeichnis
