TEFAL OptiGrill+ XL Bedienungsanleitung Seite 5

GRILL POSITION
6
7
rare
medium well-done
8
8
6. Open the grill and place the food on the
cooking plate.
Comments: If the appliance remains
open for too long, the safety system will
turn off the appliance automatically after
a while.
7. Close the appliance to start the cooking
cycle. The cooking level indicator turns
blue to indicate the cooking is in progress
(for the best results, do not open or move
your food during the cooking process).
The appliance automatically adjusts the
cooking cycle (time and temperature)
according to the food thickness and
quantity.
Note for very thin pieces of food: Close
the appliance, the button OK will flash
and the indicator will stay steady white
until you press OK. Press OK to ensure the
appliance recognizes the food and that the
cooking cycle starts.
8. According to the level of cooking, the
indicator light changes color. While
cooking is in progress, a beep alerts you
each time a cooking level is reached. When
the indicator light is yellow with a beep,
food is rare, orange with a beep, food is
medium and red with a beep, food is well
done.
N.B.: If you like your meat very rare,
remove the meat when the cooking level
indicator reaches steady blue.
Please note, especially on meat, it is normal
that cooking results vary depending on
type, quality and origin of food.
GRILLPOSITION
9
10
Keep warm function
Once the red level is reached, the cooking is finished, the appliance automatically activates the keep warm function,
the indicator light is red, and the device begins to beep every 20 seconds. If food is left on the grill, it will continue to
cook while the cooking plates cool. You may deactivate the beep by pressing the button " OK ".
Note : The security system will power off the appliance automatically after a while.
Cooking a second batch straight away:
Once your first batch of food has finished cooking:
a) Make sure that the appliance is closed, and that no food is remaining inside.
b) Select the cooking program (this step is necessary even if the program is the same as for the foods you have just
finished cooking).
c) Press the button " OK " to begin preheating. While preheating, the color level indicator will flash white.
d) Once preheating is complete, the appliance will beep, and the indicator light will be steady white.
e) The appliance is ready to be used once preheating is complete. Open the grill and place the food inside the
appliance.
Important:
– Please note that preheating is required for each new batch. Before preheating, make sure that the appliance is
closed, and that no food is remaining inside. Wait for preheating to finish before opening the grill and placing
food inside.
– If the new preheating cycle is activated immediately after the end of the previous cycle, the preheating time
will be reduced.
9. When the color corresponding to your
desired cooking level becomes steady
and the beep sounds, open the appliance
and remove your food.
Note : If you want to cook food to
different personal tastes, open the grill
and remove the food when it has reached
the desired level and then close the grill
and continue cooking the other food. The
program will continue its cooking cycle
until it reaches the final level.
10. When finished cooking, remove food and
close the appliance. The control panel
will light up and set itself to 'choice of
program' mode.
Comment:The security system will turn
off automatically after a while if no
program selection is made
9