Fassi PRO26F Bedienungsanleitung Seite 37

Target distance
1. Use the function dial to set the target distance (preset value=5.0), press START/STOP to train.
2. DISTANCE will start counting down from the target value, for TIME/CALORIES/ RPM/ SPEED/ WATT/ RPM & HEART RATE
corresponding values will be displayed.
3.
The drawing animation shows only USER, it jumps to the next figure after one fifth of the set distance.
4. Press the START/STOP key to end the training. The STOP symbol flashes, all values are retained.
5. Pressing the RESET /Joggle wheel /ENTER keys is not allowed during training.
6. In STOP mode, press RESET button, the monitor will return to the function setting page.
Target calories
1. Use the function dial to set the target CALORIES (preset value=100), press START/STOP to train.
2. CALORIES starts counting down from target value, for TIME/DISTANCE/RPM/SPEED/WATT/RPM & HEART RATE.
3. corresponding value is displayed.
4.
The character animation shows only USER and jumps to the next number after one fifth of the calories set.
5. Press the START/STOP key to end the training. The STOP symbol flashes, all values are retained.
6. Pressing the RESET / FUNCTION KEY /ENTER keys is not allowed during training.
7. In STOP mode, press RESET button, the monitor will return to the function setting page.
OPERATING INSTRUCTIONS
36