Operation; Chaser; Stand Alone Operation - EuroLite LED LMCTC RBG Bedienungsanleitung

OPERATION

After you connected the effect to the mains, the EUROLITE LED LMCTC RBG DMX Lighting Controller
starts running.

Chaser

A chaser is a sequence of different programs that will be called up one after another. With the EUROLITE
LED LMCTC RBG DMX Lighting Controller, you can select up to 16 different chasers.
Selecting a chaser
Press the MODE button and select the desired chaser.
Please Note: In order to switch programs, please set the address in DMX mode to 0.
Press the MODE button and select the desired Speed and Flash Frequence parameters.
The desired parameter values can be selected via the UP or DOWN buttons.
Mode Option: Possible Colours
Static Colours Blackout, red, green, yellow, blue, violet, cyan, white
Mode Option: SET UP Option
Colour change Speed
Flash Frequence
Slow flow 1 Speed
Flash Frequence
Slow flow 2 Speed
Flash Frequence
Roll chase 1 Speed
Flash Frequence
Roll chase 2 Speed
Flash Frequence
Multi-colour Speed
Flash Frequence
Fast flow 1 Speed
Flash Frequence
Fast flow 2 Speed
Flash Frequence
2 colour chase Speed
Flash Frequence
Colour Sortation
2 colour flow Speed
Flash Frequence
Colour Sortation
Colour fade Speed
Flash Frequence
Autorun Speed
Flash Frequence
System mode Tube Addressing:
Tube Amount:
DMX Addressing
* Please Note: After determining the number of tubes being used, the address must be set once before
taking the system into operation for the first time.

Stand Alone operation

In the Stand Alone mode, the LED LMCTC RBG DMX Lighting Controller can be used without controller.
UP/DOWN
1 -- 100
1 -- 100
1 -- 100
1 -- 100
1 -- 100
1 -- 100
1 -- 100
1 -- 100
1 -- 100
1 -- 100
1 -- 100
1 -- 100
1 -- 100
1 -- 100
1 -- 100
1 -- 100
1 -- 100
1 – 100
1 -- 20
1 -- 100
1 – 100
1 -- 20
1 -- 100
1 -- 100
1 -- 100
1 -- 100
0 – 508 (YES/NO) *
1 – 1000
1 – 508
20/23 5192861A_V_1_1.DOC