Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7.2 Maintenance
NOTE
IFA approval according to the requirements for welding fume separation
class W3/IFA-tested according to
DIN EN ISO 15012-1
The IFA approval becomes void if:
•
The product is used other than as intended or is subject to
constructive modifications.
•
Non-original spare parts, in accordance with the spare parts list, are
used.
The quality standard can only be guaranteed if original spare parts are
used.
The manufacturer accepts no liability for damage caused by the use of
non-original parts.
All maintenance work must be recorded in the maintenance logbook.
7.2.1 Emptying the dust collection container
The dust collection container fill level must be checked at regular intervals.
How often the dust collection bucket/disposal bag needs replacing
depends on the type and quantity of the deposited dust particles. For this
reason, we cannot state specific replacement intervals. Since particularly
light dust particles can be stirred up simply by the airflow through the
inside of the product and in the course of the dust collection
bucket/disposal bag replacement, the dust collection bucket/disposal bag
may only be filled up to 50 mm below the top lip of the dust collection
container.
1502756-02
- 168 -
EN
Werbung
