Minute Minder; Countdown-Timer - AEG HK634200XB Benutzerinformation

26 www.aeg.com
pair (see the illustration). The power
function increases the power to the max-
imum level for one cooking zone in the
pair. The power in the second cooking
zone automatically decreases. The heat
setting display for the reduced zone
changes between two levels.
4.7 Timer
Count Down Timer
Use the Count Down Timer to set how
long the cooking zone operates for only
this one time.
Set the Timer after the selection of
the cooking zone.
You can set the heat setting before or af-
ter you set the timer.
• To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
• To activate or change the Timer:
touch
time (
dicator of the cooking zone starts to
flash slow, the time counts down.
• To deactivate the Timer: set the
cooking zone with
deactivate the Timer. The remaining
time counts back to
of the cooking zone goes out.
• To see the remaining time: set the
cooking zone with
of the cooking zone starts to flash
quickly. The display shows the remain-
ing time.
When the time comes to an end, the
sound operates and
cooking zone deactivates.
or of the timer to set the
00 99
- minutes). When the in-
and touch
00
. The indicator
. The indicator
00
flashes. The
• To stop the sound: touch

Minute Minder

You can use the Timer as a Minute
Minder while the cooking zones do not
operate. Touch
set the time. When the time comes to an
end, the sound operates and
• To stop the sound: touch
4.8 STOP+GO
The function sets all cooking zones
that operate to the lowest heat setting (
).
When operates, you cannot change
the heat setting.
The function does not stop the timer
function.
• To activate this function touch
The symbol
• To deactivate this function touch
The heat setting that you set before
comes on.
4.9 Lock
When the cooking zones operate, you
can lock the control panel, but not
prevents an accidental change of the
heat setting.
First set the heat setting.
To start this function touch
bol comes on for 4 seconds.
The Timer stays on.
To stop this function touch
setting that you set before comes on.
When you stop the appliance, you also
stop this function.
to
4.10 The Child Safety Device
This function prevents an accidental op-
eration of the appliance.
To activate The Child Safety Device
• Activate the appliance with
not set the heat settings.
• Touch
comes on.
• Deactivate the appliance with
. Touch or
00
comes on.
. The sym-
. The heat
for 4 seconds. The symbol
to
flashes
.
.
. It
. Do
.