General Information; Operation; Structure Of Safety Instructions - STIEBEL ELTRON DHM 3 Bedienunganleitung

oPerATIoN

geNerAL INforMATIoN

- In the case of damage, the power cable must only
be replaced by a qualified contractor authorised
by the manufacturer using the original spare
part.
- Secure the appliance as described in chapter „In-
stallation / Installation".
- Observe the maximum permissible pressure (see
chapter „Specification / Data table").
- The specific water resistivity of the mains water
supply must not be undershot (see chapter "In-
stallation / Specification / Data table").
- Drain the appliance as described in chap-
ter „Installation / Maintenance / Draining the
appliance".
www.stiebel-eltron.com
oPerATIoN
1. General information
The chapter „Operation" is intended for appliance users and qual-
ified contractors.
The chapter „Installation" is intended for qualified contractors.
Note
Read these instructions carefully before using the appli-
ance and retain them for future reference.
Pass on the instructions to a new user if required.
1.1 Safety instructions

1.1.1 Structure of safety instructions

KEYWORD Type of risk
Here, possible consequences are listed that may result
from failure to observe the safety instructions.
f Steps to prevent the risk are listed. f
DHM | 13