Sony CFD-V10 Bedienungsanleitung

Troubleshooting
General Radio
The power does not come on. Audio is weak or has poor
quality.
• Connect the AC power cord securely.
• Make sure the batteries are inserted
• Replace all the batteries with new
correctly. ones if they are weak.
• Replace all the batteries with new
• Move the player away from the TV.
ones if they are weak.
There is no audio. The picture of your TV becomes
unstable.
• Make sure the FUNCTION selector is
set to the function you want to
• If you are listening to an FM program
operate.
near the TV with an indoor antenna,
• Adjust the volume.
move the player away from the TV.
• Unplug the headphones when
listening through speakers.
Tape player
CD Player The tape does not move when
you press an operation button.
The CD does not play/ "– –" lights
• Close the cassette compartment
in the display even when a CD is
securely.
in place.
• Make sure that the CD compartment The r button does not function/
is closed.
The tape does not play.
• Place the CD with the label surface
• Make sure the safety tab on the
up.
cassette is in place.
• Clean the CD.
• Make sure the FUNCTION selector is
• Take out the CD and leave the CD
set to CD, AM or FM.
compartment open for about an hour
to dry moisture condensation.
The tape does not erase
• Make sure the FUNCTION selector is
completely.
set to CD.
• Clean the erasing heads.
The sound drops out. • Replace all the batteries with new
ones if they are weak.
• Reduce the volume.
• Clean the CD, or replace it if the CD
is badly damaged
• Place the player in a location free
from vibration.
• Cleans the lens with a commercially
available blower.
Choosing the power sources
Use the AC power source whenever you record since recording
consumes much power.
Connecting the AC power cord
Insert one end of the supplied AC power cord to the AC IN socket at the
rear of the player, and the other end to the wall outlet.
1
to AC IN
2
Using the player on batteries
Insert six R20 (size D) batteries (not
supplied) into the battery compartment.
To use the player on batteries, disconnect
the AC power cord from the player.
Tip
Replace the batteries when the OPR/BATT indicator dims or when the
player stops operating. Replace all the batteries with new ones. Before you
replace the batteries, be sure to take out the CD from the player.
The tape does not record.
• Make sure the tape is inserted
properly.
• Make sure the safety tab of the
cassette is in place.
The audio is weak/The audio
quality is poor.
• Clean the heads, pinch roller and
capstan with a cotton swab slightly
moistened with cleaning fluid or
alcohol.
• Demagnetize the heads and all metal
parts in the tape path with a
commercially available tape head
demagnetizer.
The sound is distorted.
• The TYPE II (high position) or TYPE
IV (metal) tape is being used. Use
TYPE I (normal) tape only.
Record/playback head
Erase head
Specifications
CD player section
Adjusting the voltage (only
System
for the models equipped
Compact disc digital audio system
with VOLTAGE SELECTOR at
Laser diode properties
Material: GaAlAs
the bottom)
Wave length: 780 nm
Be sure to set the VOLTAGE
Emission duration: Continuous
SELECTOR (at the bottom) to your
Laser output: Less than 44.6 µW
local power supply. (This output is the value measured at a
distance of about 200 mm from the
objective lens surface on the optical
pick-up block with 7 mm aperture.)
Spindle speed
200 r/min (rpm) to 500 r/min (rpm)
(CLV)
Number of channels
2
Frequency response
20 - 20,000 Hz +1/-2 dB
Wow and flutter
Tip
Below measurable limit
Only for the customers supplied
Radio section
with an AC plug adaptor:
Frequency range
Use the supplied AC plug adaptor if
the plug of the AC power cord does Europe,Italy and Korea
to a wall
not match your outlet.
FM Europe and Korea 87.6 - 107 MHz
outlet
AM Europe and Korea 531 - 1,602 kHz
Saudi Arabia and other countries
FM Saudi Arabia
AM Tourist model
CD Radio
Cassette-
Corder
Operating Instructions
Bedienungsanleitung
(Siehe Rückseite.)
Capstan
Pinch roller
CFD-V10
Lens
CFD-910
©1996 by Sony Corporation
Printed in China
3-859-115-31(2)
IF
FM: 10.7 MHz
AM: 455 kHz
Aerials
FM: Telescopic aerial
AM: Built-in ferrite bar aerial
Cassette-corder section
Recording system
4-track 2 channel stereo
Fast winding time
Approx. 120 s (sec.) with Sony
cassette C-60
Frequency response
TYPE I (normal): 70 - 10,000 Hz
General
Speaker
Full range: 10 cm dia., 2.8 ohms, cone
type (2)
Outputs
Headphones jack (stereo minijack)
For 16 - 68 ohms impedance
headphones
Maximum power output (excluding Korean
model)
2.5 W + 2.5 W
Power output (Korean model)
Italy 87.5 - 108 MHz 1.6 W + 1.6 W (at 2.8 ohm, 10 %
Central and 65 - 108 MHz harmonic distortion in AC operation)
Eastern Europe
Power requirements
Europe
Italy 526.5 - 1,606.5 kHz
230 V AC, 50 Hz
Korea
87.6 - 107 MHz
Tourist model 76 - 108 MHz 220 V AC, 60 Hz
Other countries 87.6 - 108 MHz
Other countries
or 87.6 - 107 MHz
110 - 120 V, 220 - 240 V AC selectable
530 - 1,629 kHz
Other models 530 - 1,605 kHz 50/60 Hz or 230 V AC, 50 Hz
or 531 - 1,602 kHz
9 V DC, 6 R20 (size D) batteries
Notice for customers in the
Warning
United Kingdom
To prevent fire or shock
A moulded plug complying with BS
hazard, do not expose the 1363 is fitted to this equipment for
your safety and convenience.
player to rain or
moisture.
Should the fuse in the plug supplied
need to be replaced, same rating fuse
approved by ASTA or BSI to BS 1362,
To avoid electrical shock,
(i.e. marked with or
do not open the cabinet.
must be used.
Refer servicing to
qualified personnel only.
If the plug supplied with this
equipment has a detachable fuse
cover, be sure to attach the fuse
Information
cover after you change the fuse.
For customers in Europe
Never use the plug without the fuse
cover. If you should lose the fuse
cover, please contact your nearest
Sony service station.
This Compact Disc player is
classified as a CLASS 1 LASER
product.
The CLASS 1 LASER PRODUCT
label is located on the bottom
exterior.
Precautions
Warning
Do not install the appliance in a
On safety
confined space, such as a bookcase
or built-in cabinet.
• As the laser beam used in the CD
player section is harmful to the eyes,
do not attempt to disassemble the
The FUNCTION selector is located
casing. Refer servicing to qualified
at the front.
personnel only.
When you turn on the player, the
• Should any solid object or liquid fall
OPR/BATT indicator lights up.
into the player, unplug the player,
and have it checked by qualified
personnel before operating it any
further.
On power sources
• For AC operation, check that the
player's operating voltage is identical
Power consumption
with your local power supply (See
Korean model: AC 15 W
"Specifications") and use the
Other models: AC 20 W
supplied AC power cord; do not use
Battery life
any other type. The voltage selector is
For CD radio cassette-corder:
located at the bottom of the player
(only for the models equipped with
FM recording
the VOLTAGE SELECTOR at the
Sony R20P: approx. 13.5 h bottom).
• The player is not disconnected from
Sony alkaline LR20: approx. 20 h
the AC power source (mains) as long
as it is connected to the wall outlet,
Tape playback
even if the player itself has been
Sony R20P: approx. 7.5 h
turned off.
• For battery operation, use six size D
Sony alkaline LR20: approx. 15 h
(R20) batteries.
• When the batteries are not to be used,
CD playback
remove them to avoid damage that
Sony R20P: approx. 2.5 h
can be caused by battery leakage or
corrosion.
Sony alkaline LR20: approx. 7 h
• The nameplate indicating operating
voltage, power consumption, etc. is
Dimensions
located at the bottom.
Approx. 425 × 160 × 246 mm (w/h/d)
× 6 × 9
(16 3 ⁄ 3 ⁄ 3 ⁄ inches) (incl.
4 8 4
On placement
projecting parts)
Mass • Do not leave the player in a location
Approx. 4 kg (8 lb. 13 oz) (incl. near heat sources, or in a place
batteries)
subject to direct sunlight, excessive
Supplied accessory
dust or mechanical shock.
AC power cord (1) • Do not place the player on an inclined
or unstable place.
Design and specifications are subject to
• Do not place anything within 10 mm
change without notice.
of the side of the cabinet. The
ventilation holes must be
Optical accessories
unobstructed for the player to operate
Sony MDR headphone series properly and prolong the life of its
components.
• If the player is left in a car parked in
the sun, be sure to choose a location
in the car where the player will not be
subjected to the direct rays of the sun.
About this manual
The design of the speakers of CFD-
V10 and CFD-910 differs depending
on the area the model is marketed.
The one marketed in the UK and
Italy is the model used for
illustration purposes.
mark)
• Since a strong magnet is used for the
speakers, keep personal credit cards
using magnetic coding or spring-
wound watches away from the player
to prevent possible damage from the
magnet.
On operation
• If the player is brought directly from
a cold to a warm location, or is placed
in a very damp room, moisture may
condense on the lenses inside the CD
player section. Should this occur, the
player will not operate properly. In
this case, remove the CD and wait
about an hour for the moisture to
evaporate.
• If the player has not been used for a
long time, set it in the playback mode
to warm it up for a few minutes
before inserting a cassette.
If you have any questions or problems
concerning your player, please consult
your nearest Sony dealer.
Notes on CDs
• Before playing, clean the CD with a
cleaning cloth. Wipe the CD from the
center out.
• Do not use solvents such as benzine,
thinner, commercially available
cleaners or anti-static spray intended
for vinyl LPs.
• Do not expose the CD to direct
sunlight or heat sources such as hot
air ducts, nor leave it in a car parked
in direct sunlight as there can be a
considerable rise in temperature
inside the car.
• Do not stick paper or sticker on the
CD, nor scratch the surface of the CD.
• After playing, store the CD in its case.
If there is a scratch, dirt or fingerprints
on the CD, it may cause tracking error