A-rival PNV Bedienungsanleitung Seite 31

1.3.3 Fix the GPS Navigator with Mounting Kit
The mounting kit is composed of a back splint and a bracket. To use the GPS navigator in
an automobile, fix it on the dashboard under the front windshield. The installation flow
refers to Fig. 1 below.
1. To fix the cradle onto the
bracket, aim the 3 fasteners of
the cradle at corresponding
slots on the bracket, slide the
cradle upwards into the slots.
Put the navigator into the
cradle and push to fix it
Fig.1 Installation Flow
[Note]: Do not place the GPS navigator in positions obstructing the driver's vision. Do not
place it without fixing it or in the place of air bag or the area after the air bag is inflated.
[Note]: The mount may diversify from the illustration above.
3. To adjust the
navigator to a
proper direction,
screw
counterclockwise
the screw, adjust the
direction of the
navigator, and then
screw clockwise.
2. To fix the bracket,
pull up the switch to
flatten the rubber
sheet at the bottom,
place the bracket on
windshield, and push
down the switch.
31