geo-FENNEL Geo3X HP Bedienungsanleitung Seite 14

EN
POWER ON
Turn the ON / OFF knob to position „ON" and the instrument is ready for use. The laser lines can now
be switched on and off independently of each other or altogether.
A visible (blinking lines) and audible alarm indicates if the instrument is set up outside of the self-
levelling range. If so, re-position the instrument on a more level surface.
To power off turn the ON / OFF knob to „OFF" .
The instrument is now switched off and the compensator is locked to avoid damages during
transportation.
NB: During transportation ensure the ON / OFF knob is set to „OFF" .
To disregard this instruction may lead to damage of the self-levelling mechanism.
The laser lines can be switched on and off independently of each other or altogether:
Line H
USE WITH A RECEIVER
To extend the working range or for use in unfavourable light conditions the Geo3X HP can be used with
a receiver. The receiver is optional (not included in the kit)
Press button „P" (pulse mode LED (6) will illuminate) to change from normal to receiver mode. The
receiver can now detect the Geo3X HP laser lines (the visibility of the laser lines are weaker in this
mode).
The working range can be extended up to 60 meters by using a receiver. You will
find more detailed information in the receiver user manual.
14
Line V1 Line V2 All Lines
FR 55-M