Elma Instruments Elma 3036 Bedienungsanleitung Seite 48

Temperature function (Twin Display models only)
Be sure to insert the banana plug type-K temperature bead probe Bkp60 with correct
polarities. Slide-switch on defaults at degree C (Celsius). Press SELECT button momentarily to
select degree F (Fahrenheit). You can also use a plug adapter Bkb32 (Optional purchase) with
banana pins to type-K socket to adapt other type-K standard mini plug temperature probes.
μA Current function (Twin Display models only)
Inputs are made through the test leads terminals. Slide-switch on defaults at DC. Press
SELECT button momentarily to select AC.
Application notes:
The DC μA function is designed especially for HVAC/R flame sensor applications.
1)
The 0.1μA resolution is useful for identifying the minute current changes in flame
detector applications. Flame signal current check should indicate steady flame
signal of at least 2μA for a rectification type, or 1.5μA for an ultraviolet type (8μA for
self checking systems). If a flame signal current with inadequate strength or
fluctuation beyond 10%, check the following to avoid the risk of unwanted flame
relay dropout :
All manuals and user guides at all-guides.com
Elma 3036 + 3038 + BM126 side 48