Operation - E+E Elektronik OMNIPORT 20 Bedienungsanleitung

Manual
THUMB-WHEEL
page 38
4.

Operation

In contrast to conventional hand-held instruments, the OMNIPORT 20
does not have a keypad but a so-called "THUMB-WHEEL", on the
left-hand side of the unit.
The wheel can rotate 15° upwards and downwards and be pressed
in the centre position.
The upper menu is selected by rotating the wheel upwards. The
lower menu for configuration and calibration is selected by rotating
the wheel downwards.
The thumb-wheel must be pressed in the centre position to switch
the instrument on and off and to confirm input values.
OMNIPORT 20 english