Hands, Date, Power Reserve, Automatic - Doxa SUB 200 T.GRAPH Bedienungsanleitung

3 HANDS, DATE, POWER
RESERVE, AUTOMATIC
Your SUB 4000T is P1: Wind Manually
equipped with a Swiss Unscrew the crown
automatic movement from P0 by turning it
that draws energy from counterclockwise. When
the natural motion of completely unscrewed,
your wrist. It also has a it will click out to P1 for
power reserve indicator manual winding. Gently
(Safe Dive Indicator). Like give the crown a good
a fuel gauge, it shows number of turns
how long your watch will clockwise until you feel
operate before it shuts a slight resistance
down unless "recharged" (between 30 and 50 turns
(wound). It has a – NEVER FORCE THE
screw-down crown CROWN). Your watch is
with a seal to ensure now sufficiently wound
water-tightness. You can to keep powered up
set the time and date automatically
depending on the ("self-winding") as long
crown's position (P). as you wear it. When
sufficiently wound, the
P0: Secure Crown
power reserve indicator
In position P0, the crown
on your SUB 4000T will
is tightly screwed down
indicate "Full" (about
against the case. Always
42 hours).
keep it that way to
effectively protect the
movement against water
or other foreign matter
ingress.
10
P2: Set Date
Starting from P1, gently
pull out the crown by one
stop to position P2. Turn it
clockwise to set the date.
For months with fewer
than 31 days, manually
advance the date to the
first of the next month.
P3: Set Time
Starting from P2, gently
pull the crown out one
more stop to P3
(outermost position).
Set the time by turning
the crown counterclock-
wise. To return to P0,
gently push the crown
back against the case
until you feel resistance.
While keeping pressure
on the crown, turn
clockwise (do not apply
excessive force) until it's
screwed down tight for
a perfect seal.
6

3 HANDS, DATE, POWER RESERVE, AUTOMATIC

W
I
D
N
A
D
T
E
P1
P2
P0
P3
T
I
M
E
11