DHG Linido Benutzerhandbuch Seite 5

Hip belt
Accessory for Combi chairs
EN - Please read the instructions before using the product.
Always consult the manual of the main product for additional product descriptions, intended use specifications,
general warnings, precautions and contra-indications and maintenance and service information.
Intended use
The hip belt fits all Combi chairs.
The hip belt is well suited for users who need trunk
support, and can be adjusted to the individual user.
Installation
Remove the backrest by removing the clips on both
sides (1). Lift up the backrest. Place the hip belt from the
bottom up on to the backrest. Reinstall the backrest by
placing it down into the holes in the frame. Put both clips
back into the holes in the frame (1).
I F U
These instructions apply to the hip belt for Combi chairs.
Adjustment and use
The hip belt can be adjusted to the individual user by
loosening or tightening the strap on the front (2) or on
the back of the hip belt (3).
Maintenance
The hip belt can be removed and machine washed at up
to 30 degrees Celsius. It should not be dried in a tumbler
dryer. The hip belt can be cleaned with common cleaning
solutions without abrasive or etching properties. It is not
recommended to use solvents or chlorine.
Warnings
• Maximum weight of user: 100 kg.
Instructions for use
and user
5