Intenso XC10000 Bedienungsanleitung Seite 13

USE
Device overview
1 - Function key (ON/OFF)
2 - Status LEDs
3 - USB-A Out
4 - USB-C In
5 - USB-C Out
Operation
Function key (On/Off)
If the charging process does not start automatically, you can start it manually by briefly pressing the func-
tion key. You can stop the charging process and deactivate the Powerbank by briefly pressing the key twice.
LED Status display
If no device is connected to the Powerbank, or the connected device is fully charged, the Powerbank chan-
ges automatically into standby mode after a time interval of approx. 30 seconds.
% - Energy
1 % - 25 %
26 % - 50 %
51 % - 75%
76 % - 100 %
Commissioning / Charging the Powerbank / Charging connected devices
a) Charging the Powerbank
Please connect the supplied USB-C cable with the USB-C connection (USB-C In) of the Powerbank and con-
nect the other end of the USB cable with a standard USB-A connection of a computer or USB adapter. The
charging process and the current charge status is signalled via the LED status lights. When the Powerbank
is fully charged, the LED status lights are permanently on. The required charging time of the Powerbank is
dependent on the selected charging source and its output (max. 5V / 3A).
b) Charging devices with the Powerbank
This Powerbank has an USB-A port (USB-A OUT - Output 2.4A) and an integrated USB cable with USB-C plug
(USB-C OUT- Output 3A).
There are two options of charging a device via the Powerbank:
• Option 1: Connect the USB-C port (USB-C OUT) of the integrated cable with the USB-C port of the
device to be charged. The charging procedure starts automatically.
1
2 3
LED 1 LED 2
EN - Page 4 of 6
4
LED light
LED 3
5
LED 4